
VIVOTEK
426 - User's Manual
© 2020 VIVOTEK INC. All Right Reserved
283
PARAMETER
VALUE
DESCRIPTION
N/A
N/A
Get wireless signal strength.
8.33
WPS Transaction
(capability_network_wireless > 0)
Note:
This request requires Administrator privileges.
Method:
GET/POST
Syntax:
http://
<servername>
/cgi-bin/admin/start_wps.cgi
PARAMETER
VALUE
DESCRIPTION
N/A
N/A
Start WPS transaction.
8.34
Peripheral Control
(capability_peripheral_c<0~(n-1)>_
devicecontrol > 0)
Note:
This request requires Administrator privileges.
Method:
GET/POST
Syntax:
(for control API)
http://<servername>/cgi-bin/admin/peripheral.cgi?channel=<value>&operation=set
[&washer_mode=<value>] – Set washer mode
[&washer_status=<value>] – Set washer status
[&washer_dwelltime=<value>] – Set washer clean time
[&heater_status=<value>] – Set heater status
Example:
http://myserver/cgi-bin/admin/peripheral.cgi?channel=0&operation=set&washer_mode=wiper&
washer_status=on
Response:
HTTP/1.0 200 OK\r\n
Cache-control: no-cache\r\n
Pragma: no-cache\r\n
\r\n
Содержание Vivotek FD9189-H-V2
