DELTA DORE TYMOOV 10F2, Быстрый старт

Страница: 3 / 10

EN
4 5
Recommendations
etc. must be chosen correctly and assembled in compliance with
good practice. Furthermore, the motor operating environment and
power required are elements that must be carefully chosen and
assessed. The characteristics of the driven part must be compatible
with the rated load and operating time.
- A-weighted sound pressure level: LpA ≤ 70 dB(A).
- Cables going through a metal wall must be protected and isolated by
a sleeve.
The TYMOOV xF2 cable can be disassembled.
- If the power cable is damaged, it must be replaced by the
manufacturer, after-sales service or similarly qualified personnel in
order to prevent hazards.
- The motor must be chosen according to the requirements of
the load bearing support. See our charts for selecting the motor
according to the shutter type. A plate on the motor indicates the
nominal torque and operating time.
- TYMOOV xF2 tubular motors are designed to operate
intermittently (4 minutes of continuous operation). They are
electronically protected to prevent overheating. If there is a
thermal shutdown, the motor will operate again after a time period
of approximately 30 minutes. To operate again for 4 minutes, the
performance motor must have returned to room temperature.
DELTADORE hereby declares that the motorised systems covered by these
instructions comply with the essential requirements set out by the Machinery
Directive 2006/42/EC and the European directive RED 2014/53/EU.
The EU declaration for this equipment is available on request
from:
Service “Info techniques”
DELTADORE – 35270 Bonnemain (France)
email: info.technique@deltadore.com
DELTA DORE
35270 - BONNEMAIN - France
deltadore@deltadore.com
Because of changes in standards and equipment, the characteristics given in the text and the illustrations in this
document are not binding unless confirmed by our departments.