DELTA DORE Pack TYMOOV 10 Скачать руководство пользователя страница 8

EN

14

15

The shutter will not be locked when these stops are subsequently reached.
The motor will reverse its direction slightly so that there is no force on the 
shutter.

3/  Starting up for the fi rst time

> 3s

CR 2430

x 2

x 1

3.2.2 

Setting 1 manual stop + 1 automatic stop

 

Position the shutter

❸ 

Automatic stops

❹ 

The stops are set

Scroll step by step

❷ 

Setting the position of the manual stop

Press  button B on the front panel 
of the remote control, until the LED 

fl ashes green.

Then, press and hold the 

 button for ~3 seconds 

until  the motor is activated 

briefl y

The motor

will be activated 

briefl y

The motor

will be activated 

twice

Press the 

 button until 

the shutter reaches the lower stop.

The stop position

will now automatically 

be set.

> 3s

> 3s

CR 2430

CR 2430

x 1

x 2

3.2.3 

Setting 2 manual stops

 

Position the shutter

 

Setting the position of the first stop (e.g. Upper manual stop)

 

Setting the position of the second stop (e.g. lower manual stop)

❹ 

The stops are now set. Exit the settings mode.

Press the 

 button until the shutter is 

in the required position, then press 

 to 

stop it.

Press the 

 button until the shutter is 

in the required position, then press 

 to 

stop it.

To scroll step by step, briefl y press  then 

release the 

 and 

 buttons at 

the same time.

To scroll step by step, briefl y press  then 

release the 

 and 

 buttons 

at the same time.

Press  button B on the front panel 
of the remote control,until the LED 

fl ashes green.

Then, press and hold
the 

 button for ~3 

seconds until  the motor is 

activated  briefl y. The upper 

manual  stop will now be set.

The motor

will be activated briefl y.

Press the 

 button 

to  move the shutter to the 
required position,  then 
press 

 to stop it.

Press  button B on the front panel 
of the remote control, until the LED 

fl ashes green.

Then press the 

 button 

for ~ 3 seconds until the motor is 

activated briefl y.

 The lower manual stop will now 
be set.

When the  setting of 

the 2nd stop is completed, 

the motor will validate by 

 activating itself twice.

Scroll step by step

Содержание Pack TYMOOV 10















Отзывы: