SECTION 8: FULL SIZE BED CONVERSION
STEP 2
PARTS AND TOOLS REQUIRED TO COMPLETE STEP
31
DISASSEMBLE THE CRIB END BY REMOVING THE PREASSEMBLED BOLTS WITH THE M4
ALLEN WRENCH. ATTACH THE POST REMOVED FROM THE CHANGER IN THE PREVIOUS
STEP TO THE END OF THE CRIB BACK RAIL WHERE IT WAS PREVIOUSLY ATTACHED
USING (2) M6x75mm BOLTS (PART JJ) AND (2) BARREL NUTS (PART PP). TIGHTEN BOLTS
WITH THE M4 ALLEN WRENCH. USE THE FLAT HEAD SCREWDRIVER TO HOLD THE
BARREL NUT IN THE PROPER ALIGNMENT.
STORE ALL PARTS AND HARDWARE IN A SAFE PLACE. SEE PAGE 3 FOR INFORMATION.
JJ
M4 ALLEN WRENCH
SUPPLIED
JJ
PP
PP
