SECTION 1: CHANGING TABLE ASSEMBLY
STEP 3
PARTS AND TOOLS REQUIRED TO COMPLETE STEP
10
SLIDE CHANGER SURFACE WITH STRAP (PART R) IN BETWEEN CHANGER BACK TOP RAIL (PART C) AND
CHANGER FRONT TOP SHELF SUPPORT (PART G) GROOVES AS SHOWN.
SLIDE CHANGER TOP CENTER PANEL (PART N) INTO CHANGER SURFACE WITH STRAP (PART R)
AND CHANGER CENTER TOP RAIL (PART J) GROOVES AS SHOWN.
SLIDE CHANGER BOTTOM CENTER PANEL (PART P) INTO CHANGER CENTER TOP RAIL (PART J)
AND CHANGER CENTER BOTTOM RAIL (PART K) GROOVES AS SHOWN.
SLIDE CHANGER MIDDLE FRONT SHELF (PART L) INTO CHANGER MIDDLE RAIL (PART E) AND
CHANGER CENTER TOP RAIL (PART J) GROOVES AS SHOWN.
SLIDE CHANGER MIDDLE BACK SHELF (PART M) INTO CHANGER MIDDLE RAIL (PART E) AND
CHANGER CENTER TOP RAIL (PART J) GROOVES AS SHOWN. ENSURE THAT ALL PANELS
ARE FULLY IN THE GROOVES.
FROM STEP 2
M
P
R. CHANGER SURFACE
WITH STRAP x 1
N
L. CHANGER MIDDLE
FRONT SHELF x 1
M. CHANGER MIDDLE
BACK SHELF x 1
N. CHANGER TOP
CENTER PANEL x 1
P. CHANGER BOTTOM
CENTER PANEL x 1
R
L
