Delta Children Revolve 11898, Инструкция по эксплуатации

Страница: 12 / 20

12
Customer Service
Tel. (646) 435-8726
www.DeltaChildren.com
INSTALLING CAR SEAT ADAPTER CLIPS
1
LOCK THE REAR WHEELS
• To engage brakes
, apply a light downward pressure to the brake lever.
Ensure that the brakes have been applied correctly and that the stroller
will not move (Fig. 1)
Fig. 1
LOCKED LOCKED
2
REMOVE SEAT
• To remove seat:
Locate and squeeze the incline release trigger
located at the upper back of the seat unit (Fig. 2)
• While squeezing trigger, angle the seat so it is vertical (Fig. 2A)
and make sure white lines are aligned as shown (Fig. 2B)
• While squeezing release trigger, pull seat away from frame (Fig. 2C)
Release
trigger
Fig. 2
Fig. 2C
Fig. 2B
Align
Fig. 2A
(NOTE: CAR SEAT CLIPS AND 5-IN-1 ADAPTER SOLD SEPARATELY)
3
INSTALL CAR SEAT ADAPTERS
• To install car seat adapters:
Locate connection points at joint where
stroller seats previously (Fig. 3)
• Align and insert adapters in correct
left
and
right
sockets as shown
until you hear a “CLICK” (Fig. 3A).
• After adapter clips are securely installed, complete by attaching 5-in-1
adapter (sold separately) to the adapter clips until it “CLICKS” into a
fully locked position as shown (Fig. 3B).
X2
Fig. 3
Fig. 3A
Fig. 3B
Adapter (R)
*Clips Assembled
Adapter (R)
Adapter (L)
*5-in-1 Adapter assembled