10
Customer Service
Tel. (646) 435-8726
www.DeltaChildren.com
Fig. 5A
SETUP AND USE
6
7
5
REVERSING SEAT
• To reverse seat:
Locate and squeeze the incline release trigger
located at the upper back of the seat unit (Fig. 6)
• While squeezing trigger, angle the seat so it is
vertical
(Fig. 6A)
and make sure white lines are aligned as shown (Fig. 6B)
• While squeezing trigger, pull seat away from frame (Fig. 6C)
• Replace seat in either
forward
or
rear
facing position (Fig. 6D)
EXTENDED CANOPY & MESH OPTIONS
• To extend canopy:
Locate zipper on left edge of canopy and unzip
(Fig. 7A).
• After unzipping, pull canopy forward to extend (Fig. 7B).
• To reveal mesh:
After extending canopy, locate secondary zipper
underneath the first, on left edge of canopy, and unzip (Fig. 7A).
• After unzipping, pull fabric over canopy to reveal mesh (Fig. 7C).
• To return to normal canopy:
Follow these steps in reverse.
ADJUSTING HANDLEBAR HEIGHT
• To adjust height:
Locate and squeeze the handlebar adjust trigger
(Fig. 5)
• While holding trigger, adjust handlebar height and release until you
hear a ‘CLICK’ at one of three height positions (Fig 5A).
Fig. 7A
Fig. 5
Handlebar
Height Adjust
Squeeze
Release
trigger
Fig. 6D
Fig. 6A
Fig. 6
Fig. 6C
Fig. 6B
Align
CHILD FACING REAR
CHILD FACING FRONT
Zippers
Fig. 7B
Fig. 7C
