Customer Service
Tel. (800) 377-3777
www.DeltaChildren.com
5
ASSEMBLY
WARNING:
FALL HAZARD
Wheel can detach and cause tip over. Pull on the wheel to assure it is securely attached and make sure
the front swivel wheel is in a locked position during running, jogging or walking fast.
WARNING: ALWAYS check that both front axle lock nuts are fully tighten before each use to ensure that
the front wheel is securely fastened to the frame.
3. Slide the retainer plate onto the front wheel
axle. Be sure that the retainer plate’s bent tab
is facing towards the front fork slot. The bent
tab on the retainer plate must be lined up with
and trapped inside the front fork slot before
tightening the wheel (Fig. 1B).
4. Install the axle lock nuts and tighten with
standard wrench, box or open end wrench.
The front axle lock nut will be fully tighten and
securely fastened when there is significant
resistance to front fork. Repeat on other side.
The wheel should be held tightly in place
(Fig. 1C).
Fig. 1B
TESTING FOR PROPER WHEEL INSTALLATION
Axle Lock Nut
Retainer Plate
Front Forks
Axle and Hub
Slot
Fig. 1C
