4
5
BEFORE INSTALLATION
Turn off power source. Review all safety precautions.
1. ATTACHING TO THE JOIST
For joist spacing 16 in. - 24 in., insert two suspension
brackets (D) into the bracket covers on each side of
the fan housing (A) as shown (1.1 and 1.2).
2. Secure the suspension brackets (D) to the joists with
long wood screws (AA), and secure the suspension
brackets (D) to the fan housing (A) using the short
machine screws (BB).
Note:
The bottom of the fan housing (A) should be
flush with the bottom of the ceiling board (2.1).
Hardware Used
AA
Long wood screw × 8
BB
Short machine screw × 4
3. Remove the fan junction box cover (3.1). Using wire
nuts (not supplied), connect the house wires (3.2) to
the fan wires (3.3) as shown in the wiring diagram on
page 4. 14 AWG is the smallest conductor that can be
used for branch-circuit wiring. Reattach fan junction
box cover (3.1).
NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS
Joist
Joist or wall stud
AA
D
A
2.1
BB
3.3
3.1
3.2
3
2
A
D
D
D
D
1.1
1.2
1