10
11
4
5
6
7
8
9
10
11
1
10 1/4"
10 1/4"
INSTALL FROM ABOVE WITH SUSPENSION BRACKETS (ATTIC ACCESSIBLE)
ONLY IF UNABLE TO ATTACH DIRECTLY TO JOIST(S)
Turn off power source. Review all safety precautions.
Remove old fan.
1. Measure the opening to ensure it is large enough to
accommodate the new fan housing (A)
(10 1/4 in. x 10 1/4 in.).
If this fan is not replacing an old fan, be sure to cut a
10 1/4 in. x 10 1/4 in. opening for the fan housing (A).
2. ATTACHING TO THE JOIST
For joist spacing 16 in. - 24 in., insert two suspension
brackets (D) into the bracket covers on each side of
the fan housing (A) as shown (2.1 and 2.2).
3. Secure the suspension brackets (D) to the joists with
long wood screws (AA), and secure the suspension
brackets (D) to the fan housing (A) using the short
machine screws (BB).
Note:
The bottom of the fan housing (A) should be
flush with the bottom of the ceiling board (3.1).
Hardware Used
AA
Long wood screw × 8
BB
Short machine screw × 4
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS
1
A
D
D
D
D
2.1
2.2
AA
D
A
3.1
BB
2
3
Joist or wall stud
Joist