Digital Projection
E-Vision Laser 9000 Series
Rev A December 2019
Page 18
Important Information
Inserting a new lens
Before changing the lens, always make sure the projector is switched off and fully
disconnected from its power supply.
When changing the lens, avoid using excessive force as this may damage the
equipment.
Avoid touching the surface of the lens as this may result in image impairment.
The lens is shipped separately.
Take care to preserve the original lens packaging and protective caps for future use.
The projector will not power on without the lens fitted.
1.
Use the flange to
align the lens with
the socket.
2. Firmly push the lens into
the socket.
3. Turn the lens clockwise
until it clicks into place.
1
1
