DelRay MONTIGO DRL3613LI, Инструкция по установке и обслуживанию

Страница: 26 / 54

26
Installation
XG0226 - 042220
Installation of the wall switch
Montigo supplies 15' of low voltage wire to be plugged into the control
board. Connect to a standard single pole ON/OFF switch to the location
of your choice. You may extend these wires up to 30' in length with a
wire of equal quality.
Installations in Canada must be electrically grounded in accordance
with CSA C22.1 Canadian Electrical Code Part 1 and/or Local Codes.
Installations in the USA must be electrically grounded in accordance
with local codes or, in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70.
Optional remote control available through your Montigo Dealer.
DRL**13 (N/L) I Wiring Diagram
BLACK
WHITE
GREEN
To PPO
SPARK
SENSOR
TO ON/OFF
WALL SWITCH
YELLOW/GREEN
ORANGE
GREEN
6
10
OPTIONAL CPI/IPI SWITCH
BLUE
WHITE
X1
X5
X4
X3
X2
3.15A FUSE
BLUE
RED
single
s t age gas
val ve
Figure 15. Wiring diagram for DRL3613NI with SIT Proflame Electronic Ignition
Section 4: Wiring
MODEL
DRL3613*I
DRL4813*I
DRL6013*I
Main Power
120VAC 60Hz
6 amps