YDT-35 Operating and Servicing Manual
HL066(EN) ISSUE 1, 05/2015
11
The equipment should be mounted on a bench suitable for maintaining correct operator
posture.
Make sure there is adequate ventilation. Fluid vapour may be released from hot fixtures
or high pressure leaks and a mist may develop from the spray chamber. The specific
directions in Health & Safety Data Sheets must be adhered to.
This equipment uses Viton (fluoroelastomer) seals. If these seals are exposed to high
temperatures, they decompose into a corrosive substance which is extremely harmful
and will contaminate skin. Do not touch Viton seals or the sealing surfaces if they have
been burnt or exposed to temperatures in excess of 400ºC.
Keep the machine clear of debris, tools and rags. Ensure that all fittings, particularly the
high pressure pipes and back leakage connectors are clean and not exposed to
potential contaminants.
Ear defenders or ear plugs must be worn by all personnel in the test area. High noise
levels will damage the inner ear and cause deafness.
At the end of its useful life, please ensure your Hartridge product(s) is disposed of in
accordance with national regulations.
THIS IS AN UNCONTROLLED DOCUMENT downloaded by Lukas Matuska on 16 Feb 2016
Any technical intervention requires certified Hartridge training. Contact Hartridge Ltd for details.
