Delphi Multec 3.5, Руководство по применению, Страница: 76 / 178

Product Description Multec 3.5 Fuel Injector Application Manual
3-32 Delphi Energy and Chassis Systems
Revision: 11/05-1
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Single Or Mean Flow Curve
Single Or Mean Regression Line
-1 0 .0
-5 .0
0 .0
5 .0
1 0 .0
Linear Range
Pulse Width (ms)
Flow Rate (g/s)
% Flow Deviation From Regression
Figure 3-17 - Linear Range
Note The 5% limit for linear flow range is an SAE J1832 standard to allow
comparison of injector data. Using values other than 5% may be more
appropriate depending on the fueling accuracy needs of the engine
control system.
Linear range can apply to a single injector or an average of a population of
injectors (this must be specified when reporting the linear range value.) A
high linear range is desirable for the following reasons:
•
Allows accurate fueling at lower idle and higher peak engine speeds.
•
Better low pulse-width performance combined with higher maximum
flow. (Important for high specific output engines and turbocharged or
supercharged engines).
•
Aids in engine controller calibration accuracy.
•
Can allow for one injector model to be used for multiple engine
applications.