Model 9330-150-A01 Installation Instructions
Page 7 of 16
Document: INS-9330-A01, Rev. C
Do not copy or distribute without written permission. Unpublished Work
2022 Delphi Display Systems, Inc. All rights reserved.
Printed copies are Uncontrolled unless clearly marked as a Controlled document. User is responsible for verifying document is the current revision.
5
System Connections
The Endura 15X model 9320-150-A01 OCS display utilizes an ex15VDC power supply that is
connected to a 120-220VAC power provided at the point of installation. The display is connected to an
available port on the store network switch using the supplied CAT5 cable as shown in the figures below.
For the connection to the Point of Sale (POS) system, the Endura 15X model 9320-150-A01 OCS supports
three different configurations depending on the POS system capabilities.
5.1
Direct Network Connection to POS
For this configuration, the OCS display is connected directly to the store network switch that is on the same
network as the POS system as shown below.
Figure 3 – System Connections – Direct Connection to POS
