Model 9330-150-A01 Installation Instructions
Page 10 of 16
Document: INS-9330-A01, Rev. C
Do not copy or distribute without written permission. Unpublished Work
2022 Delphi Display Systems, Inc. All rights reserved.
Printed copies are Uncontrolled unless clearly marked as a Controlled document. User is responsible for verifying document is the current revision.
5.5
Supplied Equipment
The following components are supplied with the Endura
®
15X Model 9330-150-A01 Display. Please note that
the components are optional and may vary based on the destination market, POS configuration and specific
customer requirements.
Item Description
Part Number
Alternative Part Number
Endura 15X Display
9330-150-A01
9330-150-STD
External DC Power Supply (Optional)
9302-0013-0000
CAT5E Cable Kit
3232-200-CAT5 (White CAT5
Cable, 200 ft., RJ45 Field
Connector
DCN1546440-1 (RJ45 Field
Connector only)
Serial Server (Optional)
1601-SERIAL-SER
Digital Video Encoder (Optional)
1601-H264-ENC
VGA to HDMI Converter (Optional)
1601-VGA-HDMI
Power Cable (China CCC Certified)
DEL-PWR-CD-CN
Power Cable (Europe)
DEL-PWR-CD-EU
Power Cable (Japan PSE certified)
DEL-PWR-CD-JP
Power Cable (Taiwan)
DEL-PWR-CD-TW
Note: The country specific power cord is supplied with the 15X Display (part number and description
above). It is only used for the Endura®15X Model 9330-150-A01 Order Confirmation System Display.
5.6
Display Mounting Options
The Model 9330-150-A01 display can be mounted using a variety of different mounting enclosures.
Depending on the type of mounting option (canopy, speaker stand, menu board, etc.), Delphi may either
supply part or all of the necessary equipment. Please refer to the appropriate manual for the different
mounting options.
6
Installation Procedures
Install the 9330-150-A01 display into the applicable mounting option utilizing the supplied mounting
instructions. Once the Display is installed, pull the supplied CAT5E cable from the display to the location of
the network switch that is to be used to provide the POS data connection to the display.
6.1
CAT5 Cable Termination at the Display
The CAT5E cable should be terminated and connected to the back of the display using the supplied
waterproof RJ45 Field Connector Kit as seen in the figure below.
Note: Failure to use the supplied
waterproof connector will void the system warranty!
Figure 7 - Detail of Watertight Field Connector Kit
