13
spout.
2. Press the
button (fig. 21). The appliance now
displays: “CaPPuCCino”.
after a few seconds, frothed milk flows out of the milk
spout into the cup below. Milk delivery stops automatically
and coffee delivery begins.
Please note!
if during delivery you want to stop preparing milk, press the
button or interrupt preparation of the coffee by pressing
one of the coffee buttons.
The cappuccino is ready. Sweeten to taste and, if desired,
sprinkle the froth with a little cocoa powder.
Making frothed milk
To make frothed milk, proceed as described in the previous
section, pressing the
button (fig. 21) twice consecutively
(within two seconds). The appliance displays “FroThed MilK”.
Cleaning the milk container after use
important! danger of burns
When cleaning the internal tubes of the milk container, a little
hot water leaks out of the frothed milk tube (B5). avoid contact
with splashes of water.
When “PreSS Clean” flashes on the display (each time you use
a milk function):
1. leave the milk container in the machine (you do not need
to empty it);
2. Place a cup or other recipient under the frothed milk
spout.
3. Press the “Clean” button (fig. 22) and hold it down for at
least 8 seconds. The message “Cleaning underWay” is
displayed.
4. remove the milk container and always clean the nozzle
with a sponge (fig. 23).
Please note!
• When “PRESS CLEAN “ flashes on the display, you can still
prepare any type of coffee or milk. if you have to make a
number of drinks with milk, wait until you have delivered
the last cup before cleaning the container.
• The milk left in the container can be kept in the
refrigerator.
• In some cases, to clean you must wait for the appliance to
heat up, holding the Clean button down.
Programming the quantities of coffee and milk in the
cup
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts and milk spout.
2. Press the
button and hold it down for at least
8 seconds until the message “MilK For CaPPuCCino
PrograM QuanTiTy” is displayed.
3. release the button. The appliance starts delivering milk.
4. When the required quantity of milk has been delivered
into the cup, press the
button again.
5. after a few seconds, the appliance starts delivering coffee
into the cup and the message “CoFFee F. CaPPuCCino
PrograM QuanTiTy” is displayed.
6. as soon as the coffee in the cup reaches the required level,
press the
button again.
Coffee delivery stops.
The machine is now reprogrammed with the new quantities.
HEATING WATER
Preparation
important! danger of burns.
never leave the machine unsupervised while delivering hot
water.
The hot water spout becomes hot while water is delivering and
must be handled by the handle only.
1. Place a container under the cappuccino maker (as close as
possible to avoid splashes) (fig. 4).
2. Press the
button (fig. 2). The message “hoT WaTer”
is displayed.
4. Water flows out of the spout. delivery stops automatically
after 250ml.
5. To interrupt delivery of hot water manually, press the
button again.
Please note!
• You should not deliver hot water for more than 3 minutes
at a time.
Changing the quantity
The appliance is set by default to automatically deliver 250ml.
To modify these quantities, proceed as follows:
1. Position a container under the spouts.
2. Press the
button until the message “hoT WaTer
PrograM QuanTiTy” is displayed.
• When the hot water in the cup reaches the required level,
press the
button again.
The machine is now reprogrammed with the new quantities.
