11
Off after (Stand-by)
The appliance is set by default to go off if not used for two
hours.
The time can be changed so that the appliance switches off
after 15 or 30 minutes, or after 1, 2 or 3 hours.
1. access the menu and press the
NEXT
button until “oFF
aFTer” is displayed;
2. Press the
CHANGE
button to select the required period of
time;
3. Press the
OK
button to confirm;
4. Press the
MENU
button to exit the menu. The light on the
button goes off.
auto-off is programmed.
Water hardness
For instructions on setting water hardness, see page 16.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language
which remains as set).
1. access the menu and press the
NEXT
button until
“deFaulT valueS no” is displayed;
2. Press the
CHANGE
button to change the selection to
“deFaulT valueS yes”. The new selection flashes on the
display;
3. Press the
OK
button to restore the original settings.
Setting the language
For instructions on setting the language, see page 16.
MAKING COFFEE
Selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste.
you can also choose one of these tastes:
extra-mild taste
Mild taste
Standard taste
Strong taste
extra-strong taste
To change the taste, press the
button (fig. 7)
repeatedly until the required taste is displayed.
Selecting the quantity of coffee in the cup
To choose the coffee quantity, press the corresponding button
(fig. 8) according to the following table:
Corresponding coffee
qUANTITY (Ml)
ShorT
40 (programmable from 20
to 180)
STandard
90 (programmable from 20
to 180)
long
120 (programmable from
20 to 180)
Please note:
To make two cups of coffee, press the button twice rapidly.
Programming quantity
To modify the quantity of coffee delivered, proceed as follows:
1. Place a cup under the coffee spouts ( fig. 9).
2. Keep the button corresponding to the quantity to
be modified pressed until the message “PrograM
QuanTiTy” is displayed and coffee delivery begins. Then
release the button.
3. as soon as the coffee in the cup reaches the required level,
press the same button again.
The quantity set has now been programmed.
Regulating the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
however, if after making the first few coffees you find that
delivery is either too fast or too slow (a drop at a time), this
can be corrected by adjusting the grinding adjustment knob
(fig. 10).
Please note!
The grinding adjustment knob must only be turned when the
coffee mill is in operation.
For fuller bodied creamier coffee, turn
one click anticlockwise towards “1”
(finer ground coffee).
For faster delivery (not a drop at a time),
turn one click clockwise towards “7”
(coarser ground coffee).
These adjustments will only be evident
after at least 2 cups of coffee have been delivered.
if delivery is still too fast or too slow, repeat the correction,
turning the knob another click.
Manual rinsing
danger of burns!
during rinsing, a little hot water comes out of the coffee spouts
