29
INSERT WATER SPOUT
The hot water spout (C6) is not inserted or is
inserted incorrectly
Insert the water spout as far as it will go.
INSERT MILK CONTAINER
The milk container (D) is not inserted correctly. Insert the milk container as far as it will go (fig.
19).
INSERT INFUSER ASSEMBLY
PUSH
The infuser (A19) has not been replaced after
cleaning.
Insert the infuser as described in section “18.3
Cleaning the infuser”.
WATER CIRCUIT EMPTY
PRESS OK TO START FILLING
PROCESS
The water circuit is empty
Press "
" to deliver water from the
spout (C6) until it flows out normally. Delivery
stops automatically.
If the problem persists, make sure the water
tank (A16) is fully inserted.
PRESS OK TO START CLEANING
PROCESS OR TURN MILK
FROTH ADJUSTMENT DIAL
The milk container has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
To proceed with the CLEAN function, press "
" or turn the froth adjustment dial to
one of the milk positions.
