196
Press the button for at least 2
seconds.
(The hour flashes).
Set the hour by pressing the but-
ton repeatedly.
Press the START/STOP button.
(The minutes flash).
USING THE APPLIANCE
Before using the appliance
You are recommended to remove the pan (see instructions below), clean the pan and paddles with a damp
cloth, then dry thoroughly.
Do not immerse the pan in water unless strictly necessary.
Do not use abrasive cleaning products as they could damage the non-stick surface.
Do not wash accessories in a dishwasher.
Removing the pan
Open the lid of the appliance and remove the pan by holding it by the handle and lifting.
It is advisable to remove the pan before adding the ingredients to avoid them coming in contact with the hea-
ting element.
Adding the ingredients
You should add the ingredients to the pan in the specified order.
All ingredients must be at room temperature and measured carefully.
Replacing the pan in the chamber
To reposition the pan in the appliance, just place it in the chamber and push downwards until correctly posi-
tioned. Leave the handle down towards the side of the pan. Close the lid and plug the appliance into a 220
- 240V AC socket. Please note: when the appliance is plugged in for the first time, it emits a beep and "
-- :
--
" is displayed.
SETTING THE CLOCK
The first time the appliance is connected to the household electricity supply or after it has been without power
for some time, four dashes ("
-- : --
") will appear on the display.
To set the time, proceed as follows: