DeLonghi TRV Series, Инструкция по эксплуатации

Страница: 5 / 7

5
DESCRIPTION
A
Thermostat pointer
B Indicator light
C
Power selector
D Timer
E
Cord holder
F Wheel
USE
“Easy wheel” system
Turn the radiator upside down and rest it on a piece of cloth or
other soft surface to avoid damaging the paint.
Open the wheels completely by rotating them outwards (fig.
1). Turn the radiator upright.
Important
When in use, the radiator should always be kept vertical
(wheels at the bottom, controls at the top). Any other
position could be dangerous!
Connection
- Before using the appliance check that your supply
voltage is the same of that shown on the rating label
of the unit and that the power socket and power supply
line correspond to the load specified.
- Check also the current capacity of your fuses. CONNECT
YOUR HEATER TO EARTH PROVIDED SOCKET ONLY.
The radiator must be connected to a perfectly functioning
230-240 V AC socket with correct poles. Avoid contact
between clothing, household linen, furniture, inflammable
material and the socket providing power to the radiator.
TURNING ON
Plug into the mains, turn the thermostat pointer as far as it
will go to maximum and turn the radiator on using the power
selector as described below:
• Turn the power selector to 1 (minimum power) (the
light comes on).
• Turn the power selector to 2 (medium power) (the light
comes on).
• Turn the power selector to 3 (maximum power) (the
light comes on).
Please note: For economic operation, once the
appliance has reached working temperature, you can use
minimum or medium power (1 or 2).
Adjusting the thermostat
When the room has reached the required temperature, turn
the thermostat slowly clockwise until a "click" is heard and
no further. The thermostat will automatically regulate the
temperature set and keep it constant. If your model has three
power levels, in the spring or autumn or on mild days, you can
further save energy by using minimum power.
Frost protection function
Turn the thermostat dial to the and select the maximum
power, the appliance maintains room temperature at about
5°C, preventing freezing with minimal energy consumption.
Please note:
To turn the appliance off completely, turn
the power selector to "0".
THE TIMER
As with all clocks, the timer must be set to the exact time.
For example, if it is 9.30 in the morning, turn the dial of the
timer clockwise (in the direction of the arrow) until 9.30 is
lined up with the pointer
IMPORTANT:
DO NOT TURN THE DIAL OF THE TIMER
ANTICLOCKWISE.
The timer is an electric clock and works only if plugged into
a socket. If disconnected, the timer stops and must be reset.
See figure below:
Period of
operation
Tooth
Pointer
Selector (some models only)
Manual mode
Programme mode
Appliance off