background image

6

7

TROUBLESHOOTING

PROBLEM

CAUSE

SOLUTION

The appliance doesn't work

Be sure it is plugged in and that the 
electrical outlet is working.

Check for any obstruction.

The temperature may be set too low.

Plug into the power outlet.

Remove the obstruction and let the 
appliance cool down. If the appliance 
doesn't work please contact the nearest 
De'Longhi Customer Service.

Set the temperature to a higher position.

IMPORTANT: the timer consists of 96 teeth, each representing 
a 15-minute period. The appliance can be programmed to 
come on and go off at set times.  With the timer, the appliance 
is programmed to within 15 minute intervals and you can 
programme up to 48 cycles (each cycle consists of a coming 
on and a going off time) during a 24 hour period). The teeth 
can be pushed or pulled with your fingers.  When a tooth is 
pushed towards the centre of the dial, the radiator remains in 
operation for those 15 minutes. If the tooth is pulled out, the 
radiator is off during that period. 

Using the timer

A)  Plug into the mains socket.
B)   Turn the dial clockwise to set the current time (see 

SETTING THE CLOCK).

C)  Push the teeth corresponding to the period you do not 

want the radiator to operate towards the outside. For 
example, the radiator in the figure will be on from 2.00 
to 5.00. 

D)  Turn the power selector to the required position (1, 2 or 

3).

E)  Once the teeth have been set for the desired periods of 

heating, the radiator will come on and go off as set. 

F)  While the radiator remains plugged into the socket, the 

timer retains the correct time.

 

OPERATION WHITOUT TIMER 

To operate whitout timer, place the selector in the I position 
(see figure). 
To go back to programmed operation, place the selector in 
the    position. 

 Please note:  

when the selector is in the 0 position, the 

appliance is off. In the I and 0 positions, the timer is still set 
to the current time.

Safety device

A safety device shuts the radiator down in the case of 
overheating.  To start the radiator up again, call the nearest 
service centre. 

MAINTENANCE AND SERVICE

Before performing any operations on the appliance, always 
unplug from the mains socket and leave to cool. 
Dust the radiator with a soft damp cloth without using 
detergents or abrasives. 
If the radiator is not used for a long period of time, wrap 
the cable around the cable tidy and store the appliance in a 
dry place. This appliance has been made to last many years 
without problems. 
In the event of malfunction or doubt, do not try and repair on 
your own. There would be the danger of fire or electric shock. 
Call the nearest service centre (see list of service centres).

TECHNICAL CHARACTERISTICS

Power supply  

 

          See rating plate

Absorbed power 

 

                       “

Отзывы: