8
A
IR CONDITIONING MODE
(
FIG. 13)
Ideal for hot muggy weather when you need to cool and dehu-
midify the room.
To set this mode correctly:
•
Press the
MODE
button a number of times until the air-condi-
tioning symbol appears (3).
•
Select the target temperature by pressing the
+
or
-
button
until the corresponding value is displayed.
•
Select the required fan speed by pressing the
FAN
button.
Four speeds are available:
High speed:
to achieve the target temperature
as rapidly as possible
Medium speed:
reduces noise levels but still
maintains a good level of comfort
Low speed:
for silent operation
AUTOFAN:
the appliance automatically selects the
most suitable fan speed in relation to the tempe-
rature set on the digital display.
The most suitable temperature for the room during the summer
varies from 24 to 27°C. You are recommended, however, not to
set a temperature much below the outdoor temperature.
M
ODALITÀ
D
EUMIDIFICAZIONE
(
FIG
.
14)
Ideal to reduce room humidity (spring and autumn, damp rooms,
rainy periods, etc).
Place the appliance in the room without fitting the air exhaust
hose.
To set this mode correctly:
•
Press the
MODE
button a number of times until the dehumidif-
ying symbol (4) appears, then press the
+
or
-
button until the
required humidity level is displayed.
At the same time, the Auto fan light comes on as the appliance
automatically selects the most appropriate speed.
Water is removed from the air and collected in the tank at the
back of the air conditioner.
When the tank is full, the appliance shuts down and (full tank)
appears on the display. The tank must be extracted and emptied
(fig.
15
). When the tank has been emptied, the appliance starts
up again.
The accessory continuous drain hose enables the condensate
produced to be eliminated without requiring the tank to be emp-
tied periodically. Fit the hose with the rapid coupling as shown in
fig.
16
.
NB:
In order for the continuous drain function to operate cor-
rectly, make sure the accessory is fully connected to the
coupling. To release, press the coupling flange.
13
14
2
1
15
16
