13
P
ROGRAMMING THE TIMER
The timer can be programmed to start up and shut down to fit in
with your needs.
Programming start up
•
Press the ON button. The start-up time and message "
ON
TIMER
" flash on the remote control display (fig. 24).
•
Press the or buttons to set the time you want the
appliance to start up.
•
When that time is reached, press the
SET
button to confirm
(fig. 25). The message "
ON TIMER
" appears on the remote con-
trol display and the symbol is displayed on the appliance
to indicate that the timer is active.
Programming shutdown
•
Press the
OFF
button. The shutdown time and the messa-
ge "
OFF TIMER
" flash on the remote control display (fig. 26).
•
Press the or buttons to set the time you want the
appliance to shut down.
•
When that time is reached, press the
SET
button to confirm
(fig. 27). The message "
OFF TIMER
" appears on the remote
control display and the symbol is displayed on the applian-
ce to indicate that the timer is active.
24
25
26
27
SELF-DIAGNOSIS
The appliance has a self diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
IF ...
IS DISPLAYED, WHAT
SHOULD I DO?
LOW TEMPERATURE
(frost prevention)
PROBE FAILURE
(sensor damaged)
The appliance is fitted with
a frost protection device to
avoid excessive formation
of ice.
The appliance starts up
again automatically when
the defrosting process is
completed.
If this is displayed, contact
your local authorised servi-
ce centre.
IF ...
IS DISPLAYED, WHAT
SHOULD I DO?
FULL TANK
(
tanica piena)
FAILURE 1
(pump failure)
Empty the tank on the back of
the appliance and replace it
correctly.
The continuous drain hose is
not connected correctly or is
obstructed and the air condi-
tioner is draining into the tank.
NB: in dehumidifying mode, it is
normal for this message to
appear when the continuous
drain house is not connected.
If this is displayed, contact
your local authorised servi-
ce centre.
To deactivate the timer, press the
relative timer button ( ON or
OFF) twice.
