FITTING REGULATOR TO CYLINDER VALVE
The Safelok Valve and Connector have been developed for ease of use and enhanced safety.
The thermal Sensitive black hand wheel connector has a quick action right hand thread for easy
connection to the valve.
The valve on your gas cylinder should be a Safelock type and not a Clip-on, eg. Kosan type.
Have your gas bottle supplier fit a Safelok valve if necessary.
Once the handwheel has been firmly tightened, your heater is ready for use.
RADIANT LPG GAS HEATER INSTRUCTIONS
ASSEMBLY
2
1) Place the gas cylinder in the gas cylinder
compartment and connect the regulator
to the cylinder as shown on page 3.
2) To fit the backcover, insert the two tabs
located on the left-hand side of the back-
cover into the corresponding slots in the
cabinet. Then insert the tab on the right
hand side into its slot.
IMPORTANT:
to remove the backcover,
lift the backcover and pull clear of the
slots.
Gas cylinder
compartment
Tabs
Slot
5721008900 4-12-2003 11:21 Pagina 2
