DeLonghi PrimaDonna Elite Experience ECAM65X.85, Инструкция по эксплуатации

Страница: 16 / 37

15
Please note!
• Various alarm messages could be displayed while using
the appliance (FILL TANK, EMPTY GROUNDS CONTAINER,
ETC.). Their meaning is explained in section “24. Displayed
messages”.
• For hotter coffee, see section “9.6 Tips for a hotter coffee”.
• If the coffee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in sections “9.5
Adjusting the coffee mill” and “25. Troubleshooting”.
• Preparation of each coffee can be customised (see sections
“16. Customising the beverages
E
” and “17. Memorising
your personal profile”).
• If "Energy Saving" mode is active, you may have to wait a
few seconds before the first coffee is delivered.
9.4 Making coffee using pre-ground coffee
Important!
• Never add pre-ground coffee when the machine is off or it
could spread through the inside of the machine and dirty it.
This could damage the appliance.
• Never use more than 1 level measure (C2) or it could dirty
the inside of the coffee machine or block the funnel (A4).
Please note!
If you use pre-ground coffee, you can only make one cup of cof-
fee at a time.
1. Press "
AROMA" (B6) repeatedly until " " (pre-
ground) appears on the display (B).
2. Open the pre-ground coffee funnel lid (A2).
3. Make sure the funnel (A4) is not blocked, then add one level
measure of pre-ground coffee (fig. 14).
4. Place a cup under the coffee spouts (A8) (fig. 13).
5. Then select your required coffee (ESPRESSO, COFFEE, LONG,
AMERICANO);
6. Preparation begins. An image of the selected beverage ap-
pears on the display, together with a progress bar which
gradually fills as preparation proceeds.
Please note!
• While the machine is making coffee, delivery can be inter-
rupted at any moment by pressing " ".
• As soon as delivery has ended, to increase the quantity of
coffee in the cup, just press " ". When the re-
quired quantity is reached, press " ".
Once the coffee has been made, the appliance is ready to make
the next beverage.
Important! Making LONG coffee :
Halfway through preparation, the message "ADD PRE-GROUND
COFFEE, MAXIMUM ONE MEASURE" IS DISPLAYED. Add one
level measure of pre-ground coffee and press "
".
Please note!
• Various alarm messages could be displayed while using
the appliance (FILL TANK, EMPTY GROUNDS CONTAINER,
ETC.). Their meaning is explained in section “24. Displayed
messages”.
• For hotter coffee, see section “9.6 Tips for a hotter coffee”.
• If "Energy Saving" mode is active, you may have to wait a
few seconds before the first coffee is delivered.
9.5 Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting the
grinding adjustment dial (A5 - fig. 11).
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation during the initial phase of coffee
preparation.
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coffee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
9.6 Tips for a hotter coffee
For hotter coffee, you should:
• perform a rinse cycle by selecting the "Rinsing" function in the
settings menu (section “8.1 Rinsing ”);
• warm the cups with hot water using the hot water function
(see section “12. Delivering hot water”);
• increase the coffee temperature in the settings menu (see
section “8.10 Coffee temperature ”).
10. MAKING CAPPUCCINOS AND MILK-BASED
COFFEES
Please note!
To avoid milk with poor froth or large bubbles, always clean the
milk container lid (D2) and hot water connection nozzle (A9) as
described in sections “10.4 Cleaning the milk container after
use”, “18.10 Cleaning the milk container” and “18.11 Cleaning
the hot water/steam connection nozzle”.