Thank you for choosing to purchase a De’Longhi Prima Donna stove. Please read the
instructions carefully in order to enjoy your product fully.
GENERAL INSTRUCTIONS
Remove the stove from the packaging, checking that neither the stove nor the power cable has
been damaged during transportation. Do not operate the stove if damaged.
The pebbles/coal are found within the packaging down the sides of the stove, so ensure that the
accessories are removed before discarding any packaging.
FITTING THE LEGS
Remove the legs from the polystyrene packaging. Lay the stove on its back on a rug or soft sur-
face in order to prevent damaging the paint finish.
Screw the three legs firmly into the three holes in the base of the stove and place it in an upright
position.
POSITIONING OF THE STOVE
Your stove is designed for use throughout your living area, such as against a wall, in a corner
or within a fireplace to add instant warmth and ambience.
Position the fire so that the plug socket is accessible.
Always ensure there is sufficient airflow, otherwise the operation of the stove will be compromised.
IMPORTANT
:
Always operate the stove with the legs attached. Failure to do this will present
a danger of overheating.
PLACING THE PEBBLES/ COAL
Depending on which stove you have purchased you will find pebbles or coal packed with your stove.
In order to place the pebbles/coal on the shelf within the stove you will need to remove the sil-
ver front panel.
The front panel is held in place by two magnets at the top and by two pegs at the bottom.
Remove the silver front panel of the stove as follows:
1. Firmly hold both sides of the silver front panel
2. Carefully pull the top of the panel towards you, away from the magnets
3. Slide the panel upwards until the pegs come out of their holes
Once the stove is placed in your chosen location, unpack the pebbles/coal from the accessory
box. The pebbles/ coal are natural; therefore variation in size, shape and colour will occur.
Arrange the coal/ pebbles as you wish using as many as you require.
If your stove has pebbles, we suggest spreading the smaller ones across the shelf as a base. The
3 large pebbles should then be placed on top with the medium ones used to fill any gaps where
light could escape.
To replace the front panel, relocate and slide the pegs back into their holes and push the top of
the panel to reconnect with the magnets.
2
Содержание PRIMA DONNA
Страница 6: ...237IDL 06 03 ...
