ENGLISH
Before cleaning or maintenance, turn the
appliance off by pressing the ON/OFF button
(A) (in models L10,L15 and L20H) or button
(17) on the remote control (in models L30 and
L40) and always unplug the appliance from
the mains socket.
CLEANING THE CABINET
You should clean the appliance with a slightly
damp cloth then dry with a dry cloth.
For safety reasons, never wash the air condi-
tioning unit with water.
Precautions
Never use petrol, alcohol or solvents to clean
the appliance.
Never spray insecticide liquids or similar.
CLEANING THE AIR FILTERS
To keep your air conditioning unit working effi-
ciently, you should:
Clean the dust filter every week of operation.
The filter is housed in the intake grille.
To clean the filters, proceed as follows
1. Remove the intake grille by rotating
outwards (Fig.
G
).
Use a vacuum cleaner to remove the dust
collected on the filter.
If it is very dirty, immerse in warm water and
rinse a number of times.
The water should never be hotter than 40°C.
After washing, leave the filter to dry.
To replace, put the filters back in the intake
grille then attach the intake grille to the
appliance.
START OF SEASON CHECKS
Make sure the power cable and plug are
undamaged and the earth system is efficient.
Follow the installation instructions precisely.
END OF SEASON OPERATIONS
To empty the internal circuit completely of
water, open the cover (8) on the rear of the
appliance.
Pull out the 2 drain hoses, take off the caps
and let all the residual water flow out (fig.
I
).
When all the water has been drained, place
the caps back on the hoses and put the
hoses back inside.
Clean the filters and dry thoroughly before
putting them back.
2. Remove the dust filter by detaching it from the
grille (Fig.
H
).
G
31
C l e a n i n g
intake
grille
H
dust filter
I
