20
en
filter as shownin figure L.
Use a vacuum cleaner to remove the dust collected on the
filter. If it is very dirty, immerse in warm water and rinse
a number of times. The water should never be hotter than
40°C. After washing, leave the filter to dry.
Put the filter back in its housing.
Start of season checks
Make sure the power cable and plug are undamaged and the
earth system is efficient. Follow the installation instructions
precisely.
End of season operations
To drain all water from the circuit, first unscrew in the
anticlockwise direction the external cap from the drain hose
on the back of the appliance then remove the internal cap
(figure M) and allow the water to drain out into a basin.
When all the water has been drained, close the hose with the
2 caps. Clean the filter and leave it to dry before putting it
back in its housing.
Cleaning
L
M
