15
en
Description/Use
DESCRIPTION
1
air outlet grille
2
control panel
3
handles
4
castors
5
filter
6
evaporator air intake grille
7
air exhaust hose housing
8
condenser air intake grille
9
power cable
10
drain hose with 2 caps
11
flange with cap
12
air exhaust hose
13
hose adapter (2 pieces)
14
wall mounting accessory
15
window outlet
16
remote control unit (some models only)
USE
Electrical connections
Before plugging the appliance into the mains socket, check
that:
• The mains power supply corresponds to the value
indicated on the rating plate on the back of the
appliance;
• The mains socket and electrical circuit are adequate for
the appliance;
• The mains socket matches the plug. If this is not the
case, have the plug replaced;
• The mains socket is adequately earthed. Failure to
follow these important safety instructions absolves the
manufacturer of all liability.
Danger!
The power cable must be replaced by a
qualified professional only.
Important! Before use, make sure the air intake
and outlet grilles are unobstructed.
The instructions below will enable you to prepare your air
conditioner for operation as efficiently as possible.
Air-conditioning without installation
Just a few simple steps and your comfort isensured with your
air conditioner:
• Screw one of the hose adapters
13
to oneend of the air
exhaust hose
12
.
• Fit the other adapter
13
to the air exhaust hose housing
7
at the back of the appliance (see fig. A).
• Screw the end of the hose without adapter to the
adapter previously mounted on the appliance (see fig.
A).
• Fit the window outlet
15
to the airexhaust hose
12
as
shown in fig. B.
2
1
• Place the air conditioner near a window or French
window.
• Make sure the air exhaust hose is unobstructed.
• Open the window or French window slightly and
position the outlet
15
as shown in figure
C.
Important!
Keep the air hoses as short and free of
curves as possible to avoid constrictions.
A
B
C
