in the
window
pane
in the wall:
you are
recommended
to insulate the
section of wall
using suitable
insulation.
in the
wooden
kickboard
of a
French
window
F
Semi-permanent installation
SEMI-PERMANENT INSTALLATION
If required, your appliance can also be
installed semi-permanently (Fig.
E
).
Proceed as follows:
•
Drill a hole ø 5,25 inches (134 mm) in an
outside wall or through a window pane.
Respect the dimensions and height of the
hole given in figure
F
and
G
.
•
Fit the wall flange (
10
) into the hole.
•
Fit the air exhaust hose (
11
) in the rele-
vant housing located on the rear side of
the appliance. (fig.
A
page 5).
•
Fit the end of the hose (
11
) to the wall
flange (
10
) as shown in fig.
G
.
When the hose (
11
) is not connected, the dril-
led hole can be closed with the flange cap
(
10
).
NOTE:
When installing the air conditioner
semi-permanently, you should leave a door
slightly open little as 1/2 “ (1 cm) to guar-
antee correct ventilation and room pressure.
6
Keep the air hoses as short and free of
curves as possible to avoid constrictions.
“As special tools are required for installa-
tion, we suggest you have the applian-
ce installed by specialized personnel.”
E
G
