13
programming shutdown
• press the off button. The shutdown time
and the message “off TIMer” flash on the
remote control display (fig. 24).
• press the or buttons to set the time you
want the appliance to shut down.
• When that time is reached, press the SeT
button to confirm (fig. 25). The message
“off TIMer” appears on the remote control
display and the symbol is displayed on
the appliance to indicate that the timer is ac-
tive. At the end of the set time the appliance
switches off automatically
SELF-DIAGNOSIS
The appliance has a self diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
IF IS DISpLAYED… …WHAT SHOULD I DO?
IF IS DISpLAYED… …WHAT SHOULD I DO?
LOW TEMpERATURE
(frost prevention)
FULL TANK
pROBE FAILURE
(sensor damaged)
FAILURE 1
(pump failure)
The appliance is fitted with
a frost protection device to
avoid excessive formation
of ice.
The appliance starts up
again automatically when
the defrosting process is
completed.
If this is displayed, contact
your local authorized servi-
ce center
If this is displayed, contact
your local authorized service
center
Empty the tank on the back
of the appliance and repla-
ce it correctly. or The con-
tinuous drain hose is not
connected correctly or is
obstructed and the air con-
ditioner is draining into the
tank. note: in dehumidi-
fying mode, it is normal for
this message to appear.
23
24
25
