13
GB
Setting the timer
DEHUMIDIFYING MODE (DRY)
Ideal to reduce room humidity (spring and autumn, damp rooms, rainy periods, etc).
In dehumidifying mode, the appliance selects fan speed automatically.
Two arrows on the remote control display indicate “DRY” and “AUTO” respectively.
FAN MODE ONLY (FAN)
In fan mode, fan speed can be set by pressing the fan button “FAN” (
16
).
The fan speed changes between the speeds available (LOW/MED/HIGH).
Two arrows on the display indicate the fan mode and the speed set.
In this mode, the AUTO speed cannot be selected.
SETTING THE TIMER
The timer can be used to delay appliance start up or shutdown. This avoids wasting elec-
tricity by not operating the appliance when it is not needed.
How to program delayed shutdown
• With the air conditioning unit on, press the timer button TIMER (
19
). The time is
displayed and the "h" symbol flashes, with a flashing arrow indicating timer shut-
down.
• Set the time when you want the appliance to go off using the buttons (from 30
minutes to 24 hours). During the first ten hours, you can select half hour intervals. For
times greater than ten hours, one hour intervals can be selected.
• Press the timer button TIMER (
19
) again to confirm the selection. The appliance emits
a beep and the light (
H
) flashes on the control panel, confirming successful activa-
tion of the timer. A countdown of the time left is displayed on the remote control
display and the light (
H
) flashes on the air conditioner display.
• At the end of the set time the appliance switches off automatically.
• To cancel the timer programming, press the timer button TIMER (
19
) again. The
appliance emits a beep and both displays reset to display the settings prior to acti-
vation of the timer.
How to program delayed start up
• With the air conditioner off, press the press the TIMER button (
19
) . An arrow indicating
“timer start-up” flashes on the display. Now make all the desired settings for when the
appliance will switch on (operating mode, fan speed and temperature). Confirm the set-
tings by pressing the TIMER button (
19
). The time is displayed and the "h" symbol flashes.
Set the time when you want the appliance to switch off using the buttons (from
30 minutes to 24 hours).
During the first ten hours, you can select half hour intervals. For times greater than ten
hours, one hour intervals can be selected.
• Press the
TIMER
button (
19
) again to confirm the start-up time.
A beep sounds and the
time set is also displayed
on the control panel, confirming setting of the timer. The
light (
H
) flashes on the air conditioner display. A countdown of the time left is
displayed on both displays.
• At the end of the set time the appliance switches on automatically, with the settings
made previously.
• To cancel the timer programming, press the
TIMER
button (
19
) again. The appliance
emits a beep and both displays reset to stand-by.
