5
The instructions below will enable you to prepare your air conditioner for operation as efficiently
as possible.
Before use, make sure the air intake and outlet grilles are unobstructed.
AIR-CONDITIONING WITHOUT INSTALLATION
Just a few simple steps and your comfort is
ensured with your air conditioner:
•
Screw the hose adaptor
to the hose’s
end
.
•
Fit the air exhaust hose in the housing
at
the back of the
appliance.
Insert it as
shown in figure
A.
Be sure it is properly
fixed (check by pulling lightly the hose).
13
14
Pre p a r i n g f o r u s e
ELECTRICAL CONNECTIONS
Before plugging the appliance into the electrical receptacle, check that:
•
The outlet’s power supply corresponds to the value indicated on the rating label on the back
of the appliance;
•
The outlet and electrical circuit are adequate for the appliance;
•
The outlet is a 3-hole grounded outlet
. If this is not the case, you must choose another outlet.
Failure to follow these important safety instructions absolves the manufacturer of all liability.
The power cable must be replaced by a qualified professional only.
DESCRIPTION
1
air outlet grille
2
control panel
3
handles
4
castors
5
filter
6
evaporator air intake grille
7
air exhaust hose housing
8
condenser air intake grille
9
power cable
10
drainage with 2 caps
11
remote control compartment
12
wall flange with cap
13
air exhaust hose
14
hose adaptor
15
accessory for wall mounting
16
window bracket with pins
17
additional window bracket
18
window outlet
19
remote control
20
end of season dust cover
21
end of season accessories bag
•
Screw the window outlet
to the other
end of the exhaust hose. (see fig.
B
).
18
1
2
B
S
ash window
•
Open the window.
•
Place the window bracket
in the win-
dow, extending it to fit the width of the
window (fig.
C
).
•
Place the air conditioner near the win-
dow. Insert the assembled exhaust hose
into the window bracket hole
.
•
Make sure the air exhaust hose is unob-
structed.
•
If you have a very large window, in order
to cover your window aperture, use the
additional
window bracket without holes
extending
it to the
desired dimension,
16
13
16
A
