Heating symbol
(
B9
)
Fan symbol
(
B10)
8
9
For help with installation, operation, and for all
AIR CONDITIONING
Ideal for hot muggy weather when you need to cool and
dehumidify the room.
To set this function correctly:
•
Press the
MODE
button a number of times until the air
conditioning symbol appears. Room temperature is
displayed (fig. 11).
• Select the target tempera-
ture by pressing the
button (B6) or
but-
accessories and spare/replacement parts, please contact
our toll free customer service call center at:
1-800-322-3848
[US only]
1-888-335-6644
[Canada only]
ton (B3) until the required
°F
value is displayed. During
12
selection, the temperature
flashes (fig. 12).
01-800-711-8805
(Mexico only]
OPERATING FROM THE CONTROL PANEL
Note
:
•
Before plugging the appliance check the caps on the
back of the unit are correctly inserted and screwed
on the drainage hose A10.
•
Never turn the air conditioner off by unplugging from the
outlet. Always press the button, then wait for a few
minutes before unplugging. This allows the appliance to
perform a cycle of checks to verify operation.
TURNING THE APPLIANCE ON
Plug into the electrical
receptacle. Two lines appear on
the display indicating that the
appliance is in stand-by (fig. 10).
Press the button (
B1
).
10
The first time the appliance
is turned on, it will be in air
conditioning
mode.
Room
temperature will be displayed
and fan speed will be at
°F
minimum (fig. 11). When turned
on subsequently it will be in the
11
same mode as when last turned
off.
Press the
MODE
button (
B2
) until the light corresponding to the
desired mode lights up:
Air conditioning
symbol (
B7
)
Dehumidifying
symbol (
B8
)
After 10 seconds, room temperature is displayed again.
•
Select the required fan speed by pressing the button.
There are 3 speeds available:
High speed:
to achieve the target temperature as rapidly
as possible;
Medium speed:
reduces noise levels but still maintains a
good level of comfort;
Low speed:
for silent operation.
The most suitable indoor temperature for the room during
the summer varies from 75°F to 81°F (24 to 27°C). You are
recommended, however, not to set a temperature much below the
outdoor temperature.
Note
:
When installing the air conditioner, you should leave a door sli-
ghtly open little as 1/2“ (1 cm) to guarantee correct ventilation
and room pressure.
DEHUMIDIFYING
Ideal to reduce room humidity (spring and autumn, damp ro-
oms, rainy periods, etc). For this mode, the appliance should be
prepared in the same way as for air conditioning, with the air
exhaust hose attached to enable the moisture to be discharged
outside.
To set this function correctly:
• Press the MODE button a
number of times until the
°F
dehumidifying symbol ap-
pears (fig. 13).
13 In this mode, with room tempe-
rature above 77 °F, the fan speed
is adjustable. If the temperature is below, fan speed is selected au-
tomatically by the appliance and cannot be set manually.
8
