INTRODUCTION
Thank you for choosing a De’Longhi product. Please take a few
moments to read the instructions to avoid risks or damage to the
appliance.
DESCRIPTION
Description of the appliance (see page 3 - A)
A1
Air outlet grille
A2
Control panel
A3
Handles
A4
Castors
A5
Filter
A6
Evaporator air intake grille
A7
Air exhaust hose housing
A8
Condenser air intake grille
A9
Power cable
A10
Drainage with 2 caps
A11
Remote control compartment
A12
Remote control
Description of the control panel (see page 3 - B)
B1
ON /OFF button
B2
MODE selection button
Air conditioning, dehumidifying, heating, fan
B3
Reduce temperature/programme mode time button
B4
Timer button
B5
Fan speed button (MAX/MED/MIN)
B6
Increase temperature/programme mode time button
B7
Air conditioning symbol
B8
Dehumidifying symbol
B9
Heating symbol
B10
Fan symbol
B11
Alarm symbol
B12
Fan speed indicator
B13
Temperature scale indicator
B14
Time indicator
B15
Set temperatures, room temperature and programmed
on/off time
B16
Timer symbol
B17
Room temperature symbol
B18
Set temperature symbol
Description of the accessories (see page 2 - C)
C2
Air exhaust hose
C3
Hose adaptor
C4
Accessory for wall mounting
C5
Window bracket with pins
C6
Additional window bracket
C7
Window outlet
C8
Remote control
C9
End of season dust cover
C10
End of season accessories bag
Electrical connection
Before plugging the appliance into the electrical receptacle,
check that:
•
The outlet’s power supply corresponds to the value indicat-
ed on the rating label on the back of the appliance;
•
The outlet and electrical circuit are adequate for the appli-
ance;
•
The outlet is a 3-hole grounded outlet . If this is not
the case, you must choose another outlet. Failure to follow
these important safety instructions absolves the manufac-
turer of all liability.
If it becomes necessary, the power cable must be re-
placed by a qualified professional only.
The instructions below will enable you to prepare your air condi-
tioner for operation as efficiently as possible.
Before use, make
sure the air intake and outlet grilles are unobstructed.
USE
Note:
This appliance is provided with an auto-evaporation
feature for condensate removal during cooling and
dehumidifing modes.
Air conditioning with installation
For optimal results set-up your appliance in this way:
1) Screw the hose adaptor
C3
to the hose’s end
C2
.
2) Fit the air exhaust hose in the housing at the back of the
appliance. Insert it as shown in figure
1
.
1
3) Drill a hole (ø134mm / 5.27 in.) in an outside wall or
through a window pane.
6
