background image

24

;;;

;;;

;;;;

;;;;

;;;;

;;;;

;;

MAINTENANCE

Always remove the plug from the power
socket before carrying out any cleaning or
maintenance operations.

The air-conditioner must never be washed with
running water.

CLEANING THE CABINET

Clean the cabinet with a damp cloth and dry
carefully with a dry cloth.

Warning

Never use petrol, methylated spirits or solvents
for cleaning. Never spray insecticides or similar
products on the appliance, as these may seriously
damage the paintwork and plastic.

CLEANING THE AIR FILTER

• If the air filter is dirty, air circulation is reduced

and the efficiency of the air-conditioner will be
diminished. It is therefore recommended to
clean the filter at weekly intervals.

• Remove the filter as shown in the figure.

AT THE END OF THE SEASON

Switch off the appliance by pressing the ON/OFF
key.
Remove the plug from the drainage tube and
empty the water from the internal condensation
tray.
Clean the filter, and dry it carefully before
replacing.
Cover the appliance with a plastic bag to protect
it from dust.

• Use a vacuum cleaner to remove the dust from

the filter. If the filter is very dirty, wash it in
lukewarm water and rinse thoroughly. The tem-
perature of the water should not exceed 40°C.
Allow the filter to dry before replacing it in the
appliance.

AT THE BEGINNING OF THE SEASON

Check that the power cord and the plug are
undamaged and that the power socket is properly
earthed.
Ensure that the installation procedures are
followed meticulously.

IMPORTANT

• This appliance is designed to cool domestic

environments, and should not be used for any
other purpose.

• Any attempts to modify or alter the

characteristics of the appliance may be
dangerous.

• Should repair be necessary, contact your

nearest authorised Service Centre. Any repairs
carried out by unqualified personnel may be
dangerous.

• This appliance must be properly earthed. Have

your electrical system checked by a qualified
electrician.

• Avoid the use of extension cords.

• Always remove the plug from the power socket

before performing any cleaning or maintenance
operations.

• Do not move the appliance by pulling the

power cord.

• Do not install the appliance in a room which

might contain gas, oil or sulphur, or near sources
of heat.

• Do not place hot or heavy objects on the

appliance.

• Clean the air filter at least once weekly.

• The appliance should be transported in the

upright position or placed on its side.
Empty the condensation tray before transporting
the appliance.
After transportation, wait at least one hour before
switching on the appliance.

Filter

Содержание PAC 36












Отзывы: