27
HOW TO START UP THE CONDITIONER
(see control panel on the opposite page)
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
The appliance comes
on
If not, refer to pg. 30
To switch off the appliance,
press the
Power
push-button.
Plug the appliance into the mains.
The signal lamp will come on
.
▼
Press the key for the function required:
AIR-COOL. KEY
= Air-conditioning
HEAT. KEY
= Heating
AUTO. KEY
= Automatic climatization
(air-conditioning or heating)
AIR-CONDITIONING
HEATING
AUTOMATIC
The
Min.
speed warning
light comes on.
The
Econ
signal lamp
comes on (economic elec-
tric heating 1300W)
The appliance automati-
cally selects
heating
(when
it is too cold),
air-condi-
tioning
(when it is too hot)
or
remains switched off
Move the cursor to maxi-
mum hot position. The heat-
ing signal lamp comes on.
(When the room tempeture
has reached the desired
level, move the sliding ther-
mostat control gradually to
the min. position: the unit
switches off and the heat-
ing signal lamp start to
flash).
Press the “Air-conditioning”
key again to increase fan
speed. The Max. speed
warning light comes on.
Press the “Heating” key
again to obtain Max. power.
The Max. heat warning light
comes on.
One of the signal lamps will
come on, depending on the
function selected by the
microcomputer.
Select either the
“Programmed”
or
“Non-programmed”
mode
(see pg. 26)
Press the ON/OFF key.
The function signal lamps flash and the
signal lamp goes
out.
Move the cursor to maxi-
mum cold position. The air-
cooling signal lamp comes
on. (When the room
tempeture has reached the
desired level, move the slid-
ing thermostat control
gradually to the min. posi-
tion: the unit switches off
and the conditioning sig-
nal lamp start to flash).
