ENGLISH
2
36
CHAPTER 2 – USING THE CONTROLS AND MODES
2.3 AUTOMATIC DEFROSTING AND COOKING SEQUENCE
In order to programme an automatic defrosting and cooking sequence proceed as follows:
Set the automatic defrosting mode by
pressing the
Function
key (3) twice
(mode selection) . The indicator corre-
sponding to the automatic defrosting
will appear on the display.
1
Set the length of time required for
the defrosting (in minutes) by tur-
ning the
Time Adjust
knob (14).
2
Set the cooking by selecting the
desired mode with the
Function
key
(3) (mode selection) until the corre-
sponding indicators appear.
(ex. Combined mic fan function)
3
Adjust the length of cooking time
and, if included in the mode, the
microwave power level and the
oven temperature as shown in the
preceding paragraph (par. 2.2).
The
Sequence
indicator will
begin to flash.
4
+
Press the
Start
key (13). The
Sequence
indicator will flash on display
1 during all the time the defrosting takes place.
The passage from defrosting to cooking will be signalled by a sound
signal.
5
mw 665 GB.qxp 6-02-2002 12:06 Pagina 36
