27
20. TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact customer services.
PROBLEM
POSSIBLE CAUSE
REMEDY
The appliance does not turn on.
It is not plugged into the mains socket.
Plug into the mains socket.
The coffee is not hot.
The cups were not preheated.
Warm the cups by rinsing them with hot
water (Please note: you can use the hot
water function).
The internal circuits of the appliance have
cooled down because 2-3 minutes have
passed since the last coffee was made.
Before making coffee, press and hold the
button for 5 seconds to perform a
rinse cycle and warm the internal circuits.
Coffee temperature setting too low.
Set a hotter coffee temperature in the set-
tings menu (see “15. Settings menu”).
The machine must be descaled
Carry out the descale procedure. Next,
check the water hardness (“12. Measuring
water hardness”) and make certain the
machine setting matches the local water
supply hardness (“15. Settings menu”).
The coffee is under extracted, weak or not
creamy enough.
The coffee is ground too coarsely.
Adjust the grinding level (“8.6 Adjusting
the coffee grinder”r”). The effect is not
visible until at least 2 coffees have been
made.
The coffee is unsuitable.
Use coffee for espresso machines.
Coffee not fresh.
The coffee pack has been opened for too
long and has lost its taste.
The coffee is delivered too slowly or drop
by drop (over extracted).
The coffee is ground too finely.
Adjust the grinding level (“8.6 Adjusting
the coffee grinder”r”). The effect is not
visible until at least 2 coffees have been
made.
The machine does not make coffee
Impurities have been detected in the in-
ternal circuits
Wait until the machine is ready for use
again, and proceed to select the required
beverage. Contact customer services if
the problem persists.
Coffee does not come out of one or both
spouts.
The coffee nozzles are blocked.
Clean the nozzles with a cloth. Any res-
idues can be removed with a toothpick,
if necessary.
The coffee delivered is watery.
The pre-ground coffee funnel is clogged. Open the door and clean the funnel with
the help of a brush.
The infuser cannot be extracted.
The machine has not been turned off.
Turn the machine off by pressing the
button.
At the end of descaling, the appliance
requests a third rinse
Water tank not filled to the MAX level
during the course of the two rinse cycles
Empty the drip tray, fill the tank up to the
MAX level and run the third rinse cycle.
→
Содержание MAGNIFICA EVO ECAM29 2Y Series
