DeLonghi Karma L, Инструкция по эксплуатации

Страница: 55 / 116

54 55
EN
3.2 Electrical connections
You are recommended to have the appliance installed by a qualified professional.
The appliance must be installed in compliance with national legislation regulating
electrical equipment and installations.
When the appliance is installed, make the power is off and the mains switch is in the
“O“ position.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid hazard.
Never use the appliance if the electronic controls are damaged.
The appliance requires a 230 V ~ 50 Hz power supply. Make sure the power line is
appropriate for the data given in table 1.
Make sure the fixed power line is fitted with a disconnecting switch allowing the appliance
to be disconnected completely from the household mains, included the Pilot Wire, when
present, in accordance with the wiring rules.
If the appliance is installed in a bathroom, the power line must be fitted with a 30 mA
RCD (high sensitivity residual current protection device).
The power supply line and pilot wire control unit must be protected by the same differential
protection device.
Permanently connected appliances must be connected using a connector block placed
within a proper junction box.
When installing the appliance in damp rooms (kitchen, bathroom), the point of connection
with the household mains must be at least 25 cm from the floor.
Respect the wiring diagram in figure 5 scrupulously.