DeLonghi HFX85W20 Скачать руководство пользователя страница 9

8

9

available values are the following: 0.5h; 1h; 2h; 4h; 6h; 
8h; 12h. Once having set the desired time, to confirm wait 

about 4-5 seconds. When the programmed time has been 

reached, the appliance shuts off automatically. 

 

Once the function has been set, if you want to go back 

to operation without the timer, press the timer button 

(K) twice. The timer symbol 

 

disappears from the 

display.

 Please note:

 while the timer is active, the operating 

settings of the unit can be modified. 

 Please note:

  while this funtion is active, if the timer 

button is pressed one time, the remaining time will be shown 
on the display.

 Please note:

 if a power failure occurs, the timer 

function is reset and the appliance  goes to standby.

 Please note:

 if the ON/STAND-BY button is pressed 

while the timer function is active, the unit changes its status 
(for example it goes in ON from STAND-BY or viceversa) and 
timer function will be deactivated.

Examples: timer function

-  In heating mode press one time the timer button, 6h 

appears on display, press again the timer button to the 
desired value within 4/5 seconds. Then wait approx 4/5 
seconds for saving.

Oscillation button

If you want the appliance to distribute the airflow over a 
larger area, press the oscillation button (J) on remote control. 
The appliance will then oscillate right and left. 
To stop the oscillation in the desired position, just press 
oscillation button (J) again.

 Please note:

 never try to rotate the appliance 

manually.

 Please note: 

when changing the settings, the 

oscillation temporarily stops.

Airflow

The airflow moves around the surface of the appliance 
spreading uniformly throughout the room, ensuring a perfect 
comfort in the room.

 Important! 

NEVER put your hands or any foreign 

objects  e.g. a knife or foil, into the air outlet (S).

Airflow direction

This function allows to orientate the airflow in the best way.
There are two positions, "H" and "L" (high and low direction). 
Once the button airflow direction (I) is pressed, the buzzer 
emits a sound and the display shows "H" or "L"  for a few 
seconds. 
Examples of the display of airflow direction:

Содержание HFX85W20














Отзывы: