DeLonghi HFX85W20 Скачать руководство пользователя страница 5

4

5

IMPORTANT WARNINGS

Safety warnings

 Danger!

Failure to observe the warning may result in life threatening 
injury by electric shock. 

-   Do not locate the heater immediately 

below a socket-outlet.

-   Do not use this heater in the immedi-

ate surroundings of a bath, a shower or 

a swimming pool.

-   If the supply cord is damaged, it must 

be replaced by the manufacturer or its 

service agent or a similarly qualified 

person in order to avoid a hazard.

 Important! 

Failure to observe the warning could result in injury or dam-
age to the appliance. 

-  The appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental 

capabilities, or lack of experience and 

knowledge, unless they have been giv-

en supervised or instruction concern-

ing use of the appliance by a responsi-

ble person for their safely.

  Young children should be supervised 

to ensure that they do not play with 

the appliance.

-  

CAUTION: 

To avoid the safety system 

resetting accidentally, this appliance 

must not be powered through an ex-

ternal on/off device such as a timer, or 

connected to a circuit which is turned 

off and on regularly by the energy sup-

plier.

 WARNING

: Do not use this heater in 

small rooms when they are occupied 

by persons not capable of leaving the 

room on their own, unless constant 

supervision is provided.

 

Danger of burns!!

Failure to observe the warning could result in burns or scalds. 

WARNING:

 In order to avoid 

overheating, do not cover the 

heater during operation as this 

would lead to a dangerous rise in tem-

perature.

WARNING:

 to reduce the risk of fire, 

keep textiles, curtains, or any other 

flammable material a minimum dis-

tance of 1 m from the air outlet.

Safety functions

-

  Safety device: 

the appliance is fitted 

with a safety device which switches it 

off in the event of accidental overheat-

ing (e.g. obstruction of air intake and 

outlet grilles, motor turning slowly or 

not at all). 

  To reset, unplug the appliance from 

the mains socket for a few minutes, 

remove the cause of overheating then 

plug in again. If the appliance doesn’t 

work please contact the De’Longhi 

Customer Service.

-

   Tip over safety device:

 Certain mod-

els are fitted with a tip-over switch 

which turns the appliance off if it falls 

over. To restart the appliance, simply 

place it upright again.

 Please note:

This symbol indicates recommendations and important infor-
mation for the user. 

-  Use this heater on a horizontal and sta-

ble surface.

-  Always use the appliance in an upright 

position.

-  Do not use this heater if it has been 

dropped.

-  Do not use if there are visible signs of 

Содержание HFX85W20














Отзывы: