DeLonghi HFX85W20, Инструкция по эксплуатации, Страница: 12 / 13

11
PROBLEM CAUSE SOLUTION
The display shows "
pf
" and emits
a beep
Temperature sensors are not working
properly
Please contact Customer Service
Product doesn’t turn on Check that the plug is connected to the
outlet
The set temperature has been reached
or the time set on the timer has elapsed
Plug in
Use the “+” button to increase the set
temperature
The appliance goes off unexpectedly Check that the plug is connected to the
outlet
The set temperature has been reached
or the time set on the timer has elapsed
Plug in
A dot is flashing on display, emits a
beep and unit is off The tip-over switch has been activated Make sure the appliance is standing
upright on a flat surface. If the appli-
ance doesn’t work please contact Cus-
tomer Service
The display shows "
cf
"
The filter has reached the predefined
number of hours Replace the filter and reset the alarm.
To reset the
CF
alarm, in rapid
succession insert the plug and touch
and hold the ON/STAND-BY (A) button
on the unit for at least 10 seconds until
you hear a long beep.
TROUBLESHOOTING