19
FLASH. + FLASH.
Too much coffee has been used.
Select a milder taste by turning the
dial
or reduce the quantity of pre-ground coffee.
FLASH. + FLASH.
FLASHING
The water circuit is empty
Turn the hot water/steam dial (B1) to the I po-
sition until delivery stops, then bring it back
to the 0 position. If the alarm occurs while hot
water or steam is being delivered, turn the dial
to the O position, then resume delivery. If the
problem persists, make sure the water tank is
fully inserted.
ON
The inside of the appliance is very dirty.
Clean the inside of the appliance thoroughly,
as described in the section “16. Cleaning". If
the message is still displayed after cleaning,
contact a service centre.
FLASHING
The infuser has not been replaced after clea-
ning (A17).
Insert the infuser as described in the section
"16.9 Cleaning the infuser".
ON + ON
The infuser door (A16) is open.
Close the door.
FLASHING
Indicates the hot water/steam dial must be
turned (B1).
The dial (B1) must be turned.
