22
DISPLAYED MESSAGES
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
FILL TANK!
•
The water tank is empty or
positioned incorrectly.
•
Fill the tank with water and/or
insert it correctly, pushing it
as far as it will go until it clicks
into place.
GROUND TOO FINE ADJUST
MILL!
Insert water spout and press
ok
•
The machine cannot make
coffee as there is air in the
hydraulic circuit
•
The grinding is too fine and
the coffee is delivered too
slowly.
INSERT WATER SPOUT!
•
The water spout is not inser-
ted or is inserted incorrectly.
•
Insert water spout as far as it
will go.
EMPTY GROUNDS
CONTAINER!
•
The grounds container is too
full or more than 3 days have
passed since you last made
coffee (this guarantees cor-
rect hygiene of the machine).
•
Empty the grounds container
and clean, then replace.
Important: when removing
the drip tray, the grounds
container MUST be emptied,
even if it is not completely
full. If this is not done, when
you make the next coffees,
the grounds container may
fill up more than expected
and clog the machine.
INSERT GROUNDS CONTAI-
NER!
•
After cleaning, the grounds
container has not been repla-
ced.
•
Open the service door and
insert the grounds container.
INSERT MILK CONTAINER!
•
The milk container is not
inserted.
•
Insert milk container.
•
Press the corresponding icon
and deliver water from the
spout until the flow is conti-
nuous and regular.
•
Turn the grinding adjustment
knob one click clockwise
towards "7" while the coffee
mill is in operation. (The
effect is only visible after
making 2 coffees).
If delivery is still too slow,
repeat the correction proce-
dure, turning the grinding
adjustment knob another
click until delivery is correct.
DESCALE!
•
The machine must be desca-
led
•
The descaling procedure
described in the "Descaling"
section needs to be perfor-
med as soon as possible.
