17
2. Press the icon corresponding to the function
you want to programme until "PROGRAM
QUANTITY Milk for..." is displayed and the
icon corresponding to the selected function
flashes.
3. Release the icon. The appliance starts delive-
ring milk.
4. When the required quantity of milk has been
delivered into the cup, press the icon corre-
sponding to the selected function again.
5. After a few seconds, the appliance starts deli-
vering coffee into the cup, the message "PRO-
GRAM QUANTITY Coffee for... " is displayed
(with the exception of the MILK function) and
the or icon flashes.
6. As soon as the coffee in the cup has reached
the required quantity, press the icon.
Coffee delivery stops.
The machine is now reprogrammed with the new
quantities.
PREPARING HOT WATER
Preparation
Important! Danger of burns. Never leave
the coffee maker unsupervised while delivering
hot water. The hot water spout becomes hot while
water is being delivered and must be held by the
handle only.
1. Make sure the hot water spout (B7) is atta-
ched correctly (fig. 4).
2. Place a container under the spout (as close as
possible to avoid splashes).
3. Press the icon (fig. 31). Preparation
begins. "HOT WATER" and the corresponding
animation are displayed.
4. To interrupt delivery of hot water manually,
press the icon again.
5. Once the coffee has been made, the appliance
prepares for use again.
Important: You should not deliver hot water
for more than 2 minutes at a time.
Changing the quantity
The appliance is set by default to automatically
deliver 250ml. To modify these quantities, pro-
ceed as follows:
1. Position a container under the spout.
2. Press the icon (the appliance starts delive-
ring hot water) until the message "HOT
WATER PROGRAM QUANTITY" is displayed
and the icon flashes, then release.
3.
When the hot water in the cup reaches the
required level, press the icon again.
The machine is now reprogrammed with the new
quantity.
CLEANING AND
MAINTENANCE
Cleaning the coffee maker
The following parts of the machine must be clea-
ned regularly:
-
coffee grounds container (A9),
-
drip tray (A12),
-
water tank (A7),
-
hot water and steam nozzle (A16),
-
coffee spouts (A15),
-
pre-ground coffee funnel (A4),
- inside the machine, accessible after opening
the service door (A13),
- infuser
(A8),
-
milk container (B)
-
touch screen (C)
Important!
•
Do not use solvents, abrasive detergents or
alcohol to clean the coffee maker.
With De’Longhi superautomatic coffee
makers, you need not use chemical products
to clean the appliance.
The descaler recommended by De’Longhi is
made from natural and completely biodegra-
dable substances.
•
None of the components of the appliance can
be washed in a dishwasher with the exception
of the milk container (B).
•
Do not use metal objects to remove encrusta-
tions or coffee deposits as they could scratch
metal or plastic surfaces.
Cleaning the coffee grounds
container
When "EMPTY GROUNDS CONTAINER" is displa-
yed, the grounds container must be emptied and
cleaned.
Until the grounds container has been cleaned, the
appliance continues to display the message and
coffee cannot be made.
To clean (with the machine on):
•
open the service door on the front of the
appliance (fig. 32), extract the drip tray (fig.
33), empty and clean.
