22
40
12. (If the filter is installed)
"INSERT FILTER INTO ITS
HOUSING" (fig. 40). Press
"NEXT>" and extract the
water tank. Replace the
water softener filter if
removed previously;
13. "RINSE AND FILL WATER
TANK UP TO MAX LEVEL"
(fig. 5): Fill the tank up to
the MAX level with fresh
water;
14. "INSERT WATER TANK" (fig. 6): Put the water tank back in
the appliance;
15. "POSITION 2l CONTAINER PRESS OK TO START RINSING":
Place the container used to collect the descaler solution
empty under the hot water/steam spout (fig. 8) and press
" OK";
16. Hot water is delivered from the hot water/steam spout and
"RINSING UNDERWAY" is displayed;
17. "EMPTY DRIP TRAY" (fig. 39): At the end of the second
rinse, remove, empty and replace the drip tray (A14) and
grounds container (A10). Press "NEXT>";
18. "DESCALE COMPLETE": press " OK";
19. "FILL TANK WITH FRESH WATER": empty the container
used to collect the rinse water, remove the water tank and
fill with fresh water up to the MAX level, then put back in
the appliance.
Descaling is complete.
Please note!
• If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
• After descaling, it is normal for the grounds container
(A10) to contain water.
• If the water tank has not been filled to the MAX level, at
the end of descaling, the appliance requests a third rinse to
guarantee that the descaler solution has been complete-
ly eliminated from the machine's internal circuits. Before
starting rinsing, remember to empty the drip tray;
• The appliance may request descaling cycles at very short
intervals. This is normal and due to the appliance’s ad-
vanced control system.
17.
SETTING WATER HARDNESS
The "DESCALING NEEDED - PRESS OK TO START (~45MIN)
" message is displayed after a period of time established
according to water hardness.
The machine is set by default for a hardness value of "4". The
machine can also be programmed according to the hardness
of the mains water in the various regions so that the machine
needs to be descaled less often.
17.1 Measuring water hardness
1. Remove the "TOTAL HARDNESS TEST" indicator paper (C1)
from its pack (attached to the English instructions).
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level.
17.2 Setting water hardness
1. Press the selection arrow (B2) corresponding to the "
"
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "
WATER HARD-
NESS" appears on the display;
3. Press the selection arrow corresponding to "
WATER
HARDNESS";
4. Press the selection arrow corresponding to the required
level (Level 1 = soft water; Level 4 = very hard water);
4. Press "
ESC" to go back to the homepage.
The machine is now reprogrammed with the new water hard-
ness setting.
18.
WATER SOFTENER FILTER
Certain models are fitted with a water softener filter (C4). If this
is not the case with your model, you are recommended to pur-
chase one from De’Longhi Customer Services.
To use the filter correctly, follow the instructions below.
soft water LEV.1
slightly hard water LEV.2
hard water LEV.3
very hard water LEV.4
Содержание ECAM65*.55 series
Страница 1: ...De Longhi Appliances via Seitz 47 31100 Treviso Italy www delonghi com 5713235161_01 _0118...
Страница 4: ...3 B14 B15 B16 B17 A A5 A2 A1 A4 A7 A3 B A6 A9 A8 A19 A10 A11 A13 A12 A15 A16 A17 A21 A20 A18 A14...
Страница 5: ...4 4 3 3 2 1 8 7 6 5 12 16 15 9 14 MILK 11 10 13...
Страница 6: ...5 4 8 12 16 20 18 17 24 23 32 31 21 22 19 CLEAN 25 26 27 28B 28A 29 P U S H 30 P U S H...
