DeLonghi ECAM65*.55 series, Инструкция по эксплуатации

Страница: 13 / 31

12
Please note!
• To change the beverages in another profile, go back to the
homepage, select the required profile (B11) and repeat the
procedure.
• To reset all the beverages in the profile to the default val-
ues, see section “8.16 Valori di fabbrica”.
8.5 Adjust time
To adjust the time on the display (B1), proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " SET TIME"
appears on the display;
3. Press the selection arrow corresponding to " SET
TIME": The time setting panel appears on the display;
4. Adjust the time by pressing the selection arrows corre-
sponding to (increase) or (decrease) for the
hours (H) and minutes (MIN);
5. To confirm, press the selection arrow corresponding to " OK"
(to cancel, press the selection arrow corresponding to "
ESC") and press the selection arrow corresponding to "
ESC" to go back to the homepage.
The time is now set.
8.6 Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
To enable this function, the time must already be set correctly
(see section “8.5 Adjust time
”).
To enable auto-start, proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " AUTO-START"
appears on the display;
3.
Press the selection arrow corresponding to " AU-
TO-START". Disable (or enable) the function by pressing
the selection arrow corresponding to (or );
4.
Press the selection arrow corresponding to " SET TIME".
The time setting panel appears on the display (B1);
5. Adjust the time by pressing the selection arrows corre-
sponding to (increase) or (decrease) for the
hours (H) and minutes (MIN);
6. To confirm, press the selection arrow corresponding to "
OK";
7. Press the selection arrow corresponding to " ESC" twice
to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.
Please note!
When the appliance is turned off using the main switch (A21),
the auto-start setting (if enabled) is lost.
8.7 Auto-off (standby)
Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " AUTO-OFF"
appears on the display;
3. Press the selection arrow corresponding to "
AUTO-OFF";
4. Select the required time interval by pressing the selec-
tion arrows corresponding to (increase) or
(decrease);
5. To confirm, press the selection arrow corresponding to "
OK";
6. Press the selection arrow corresponding to " ESC" to go
back to the homepage.
Auto-off is now programmed.
8.8 Cup warmer
To warm the cups before making coffee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " CUP WARMER"
appears on the display;
3. Press the selection arrow corresponding to "CUP WARMER"
to disable ( ) or enable ( ) the function.
4. Press the selection arrow corresponding to " ESC" to go
back to the homepage.
8.9 Energy saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press the selection arrow (B2) corresponding to the " "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " ENERGY SAVING"
appears on the display;