DeLonghi ECAM23.46 Series, Инструкция по эксплуатации

Страница: 11 / 22

10
6.11 Setting the language
To modify the language of the display (B1), proceed as follows:
1. Press the
P
button (B4) to enter the menu;
2. Turn the selection dial (B2) (fig. 7) until the required func-
tion is displayed;
3. Press the button (B9);
4. Turn the selection dial until the required language appears
on the display;
5. Press the button to confirm;
6. A message confirming the language installed is displayed;
7. Press the
button (B5) to exit the menu.
6.12 Cup light
This function enables or disables the cup lights (A21). The light-
ing is enabled by default. The lights come on each time coffee or
cappuccino is made and during each rinse cycle.
To disable or enable this function, proceed as follows:
1. Press the
P button (B4) to enter the menu;
2. Turn the selection dial (B2) (fig. 7) until "Cup lighting" ap-
pears on the display (B1);
3. Press the button (B9). "Disable?" or "Enable?" ap-
pears on the display (B1);
4. Press the button to enable or disable the cup
lighting;
5. When the function is active, an asterisk appears under
"Cup lighting" in the menu. Press the button (B5)
to exit the menu.
6.13 Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the
P button (B4) to enter the menu;
2. Turn the selection dial (B2) (fig. 7) until the required func-
tion is displayed;
3. Press the button (B9);
4. Press the button again to confirm and exit.
6.14 Statistics function
This displays statistics relating to the machine. To view the sta-
tistics, proceed as follows:
1. Press the
P button (B4) to enter the menu;
2. Turn the selection dial (B2) (fig. 7) until the required func-
tion is displayed;
3. Press the button (B9);
4. Statistics on the appliance appear on the display (D6), Turn
the selection dial (fig. 7) to scroll through the items;
5. Press the button (B5) twice to exit the menu.
7. RINSING
Use this function to deliver hot water from the coffee spouts
(A14) and hot water spout (C6), if inserted, to clean and heat
the appliance’s internal circuit.
Place a container with a minimum capacity of 100ml under the
coffee and hot water spouts (fig. 5).
Important! Danger of burns!
Do not leave the appliance unattended while hot water is being
delivered.
1. To enable this function, press the button (B5).
"RINSING, Please wait" appears on the display (B1);
2. After a few seconds, hot water is delivered first from the
coffee spouts, then from the hot water spout (if inserted)
to clean and heat the appliance’s internal circuit. "RINSING"
appears on the display, together with a progress bar which
fills gradually as preparation proceeds;
3. To stop the process press any button or wait for delivery of
water to stop automatically.
Please note:
• If the appliance is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the coffee grounds container
(A14) to contain water.
8. MAKING COFFEE
8.1 Selecting the coffee taste
The appliance is set by default to make coffee with a standard
taste.
Any one of these tastes can be selected:
Extra-light taste
Light taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the aroma selection button
(B6) (fig. 8) repeatedly until the required taste appears on the
display (B1).
8.2 Selecting the quantity of coffee in the cup
The appliance is set by default to make a standard quantity of
coffee. To select the quantity of coffee, turn the selection dial
(B2) (fig. 7) until the message corresponding to the required
quantity of coffee appears on the display (B1):
Coffee selected Quantity in cup (ml)
MY COFFEE Programmable:
from
≃
20 to
≃
180